SURPASS Hobby Brush 60A ESC For 1/10 Crawler RC Car Parts

Set the ESCESC uses the jumper cap to set battery type 1 Initial Start Force 5 13 21 32 default value 5 2 Low Voltage Cut Off The function is mainly to prevent the lithium battery pack from over discharging When using lithium battery pack please set the suitable v alue for low voltage protection as your like WARNING Never use the default value Non protection for lithium battery 3 1V 3 3V 2 9V default value 3 1V Note the using voltage is 7 4v3 Drag Brake Force 100 90 80 70 default value 100 4 Maximum Reverse Force 95 75 50 default value 95 5 3 Start Modes Also called Punch from soft to very aggressive default value Medium programme cardMethod 1 Connect BEC wires with the program car then turn on the ESC 2 The Green LED flashes for 2 times then LED off that is the connecting program car with ESC is successful and the Red LED on presents the current value of that item Otherwise the connecting is failed 3 Please press the Keyto select different programs4 Please press the Keyto select different value of the current program5 Please press the Key Program to confirm above selections the Green LED on immediately and has gone out within 5 seconds that is this process is successful 6 Please press the Key Reset to reset the factory setting This set can use this program card click Package list 1x esc