SUNKKO 737U 18650 Battery 220V Digital Display 2800W Testing Charge Spot Welder Welding Machine

Specifications Input voltage AC 220V 10V Primary current 2A 15APower 2800WSingle pulse welding 0 05 0 1mm nickel stripDouble pulses welding 0 12 0 15mm nickel stripSize 200x140x245mmUsage The first and second digit show the volume of current Press key the first digit will blink that means the parameter could be adjusted through UPandDOWN Press again to confirm He second digit will blink that means the parameter could be adjusted through UP and DOWN Press again to confirm P2 or P1 will blink for selecting Please select P2 or P1 throughUPandDOWNto select pulse P2 means welding once in 2 times P1 means welding once in 1 time Press again to confirm The spot welder can start to operation when the digits not blink Please select higher current power to weld material which is thickerthan 0 1mm And adjust suitable welding pressure Please refer the sheet to setting current and pulse Notices for using SUNKKO spot welding machine1 In order to obtain good weld effect please dont use the active socket and should be used the wall socket to ensure stable power supply 2 Because of the instant welding large current rated current of tripping device of the leakage protection switch should be up to 40 63A Lower than 40A will cause tripping 3 Please set the pressure adjuster to the right parameter to avoid welding effect in not good 4 Please keep the surface of welding pins clean and wipe off oxide with sand paper 5 Please keep the welding pin in sharp shape 6 P