STM32 STM32F405RGT6 STM32F405 USB IO Core MicroPython Development Board

Features: Python programming, 0 basic entry, the use of graphical code automatically generate tools to generate C code, through the USB interface to write firmware, programming speed, easy development, support Python 3.0 and above direct operation, support gravity acceleration sensor, support 4 LED lights, and a button, other modules can be extended through to external, suitable for entry learning, Internet of things development. Introduction: MicroPython is a lean and efficient implementation of the Python 3 programming language that includes a small subset of the Python standard library and is optimized to run on microcontrollers and in constrained environments. MicroPython is packed full of advanced features such as an interactive prompt, arbitrary precision integer, closures, list comprehension, generators, exception handling and more. Yet it is compact enough to fit and run within just 256k of code space and 16k of RAM. MicroPython is a full Python compiler and runtime that runs on the bare metal. You get an interactive prompt (the REPL) to execute commands immediately, along with the ability to run and import scripts from the built-in filesystem. The REPL has history, tab completion,auto-indent and paste mode for great user experience. The MicroPython plyboard is a compact electronic circuit board that runs MicroPython on the bare metal, giving you a low-level Python operating system that can be used to control all kinds of electronic project. MicroPython strives to be as compatible as possible with normal Python (known as CPython) so that if you know Python you already know MicroPython. On the other hand, the more you learn about MicroPython the better you become at Python. In addition to implementing a selection of core Python libraries, MicroPython includes modules such as "machine" for accessing low-level hardware. Size: 7x6cm / 2.76x2.36inch Specification: 1. STM32F405RG microcontroller 2. 168 MHz Cortex M4 CPU with hardware floating point 3. 1024KiB flash ROM and 192KiB RAM 4. The micro USB connector for power and serial communication 5. Micro SD card slot, supporting standard and high capacity SD cards 6. 3-axis accelerometer (MMA7660) 7. Real-time clock with optional battery backup 8. 24 GPIO on left and right edges and 5 GPIO on the bottom row, plus LED and switch GPIO available on the bottom row 9. 3x 12-bit analog to digital converters, available on 16 pins, 4 with analog ground shielding 10. 2x 12-bit digital to analog (DAC) converters, available on pins X5 and X6 11. 4 LEDs (red, green, yellow and blue) 12. 1 reset and 1 user switch 13. Onboard 3.3V LDO voltage regulator, capable of supplying up to 250mA, input voltage range 3.6V to 16V 14. DFU bootloader in ROM for easy upgrading of firmware Note: Please allow 1-3mm error due to manual measurement. please make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you. Package Includes: 1 x Development Board