SIM900 Quad Band GSM GPRS Shield Development Board Geekcreit for Arduino - products that work with official Arduino boar

Manual download click to openFeature The GPRS Shield is based on SIM900 module from SIMCOM and compatible with and its clones The GPRS Shield provides you a way to communicate using the GSM cell phone network The shield allows you to achieve SMS MMS GPRS and Audio via UART by sending AT commands GSM 07 07 07 05 and SIMCOM enhanced AT Commands The shield also has the 12 GPIOs 2 PWMs and an ADC of the SIM900 module They are all 2V8 logic present onboard Specifications Quad Band 850 900 1800 1900 MHz would work on GSM networks in all countriesacross the world GPRS multi slot class 10 8GPRS mobile station class BCompliant to GSM phase 2 2 Class 4 2 W 850 900 MHz Class 1 1 W 1800 1900MHz Control via AT commands Standard Commands GSM 07 0707 05 EnhancedCommands SIMCOM AT Commands Short Message Service so that you can send small amounts of data over the network ASCII or raw hexadecimal Embedded TCP UDP stack allows you to upload data to a web server RTC supported Selectable serial port Speaker and Headphone jacksLow power consumption 1 5mA sleep mode Industrial Temperature Range 40C to 85 CApplication M2M Machine 2 Machine Applications Remote control of appliances Remote Weather station or a Wireless Sensor Network Vehicle Tracking System with a GPS module Cautions Make sure your SIM card is unlocked The product is provided as is without an insulating enclosure Please observe ESDprecautions specially in dry low humidity