SCULPFUN S30 PRO Engraver with Automatic Air-assist System 10W Engraving Machine for Engraving and Carving Balsa Wood

SCULPFUN S30 PRO Engraver with Automatic Air-assist System 10W Engraving Machine for Engraving and Carving Balsa Wood Features: ▶ Sturdy and Durable Frame: The S30 series is made of high-strength aluminum alloy its frame can bear up to 50KG weight without damage and is very durable. The frame can be used for a long time and maintain high precision only need to upgrade the latest laser when the machine needs to be upgraded. ▶ Innovative XY Axis Expandable Design: you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade Up to 935x905mm engraving area to better handle large engraving or cutting work. And there are precise scale lines on the X-axis and Y-axis which is convenient for you to quickly measure the size of the engraved object. Specification: Model: SCULPFUN S30 PRO Power Input: 100-240V AC 50/60HZ Output: 12V 5A Engraving accuracy: 0.005mm Engraving area size: 410*400mm Machine power: about 84W Motherboard: 32-bit air-assisted motherboard reserve Bluetooth SD card offline printing function. (Upgrade Kit sold separately) Diode laser output power: 10W (note that this is light energy not electrical energy) Laser focus: 0.06x0.08mm Laser wavelength 455±5nm Focusing method: fixed focus column + sliding device Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down or remove the goggles. Air pump: Type: mainboard-controlled air pump voltage 12V flow 30L/min Air hose inner diameter: 7.5mm Engraving material: all kinds of wood (including walnut cherry and other high-density wood) MDF zigzag cardboard plastic leather PCB board aluminum oxide 304 stainless steel ceramic dark stone Cutting material: all kinds of wood (including walnut cherry and other high-density wood) MDF acrylic board cardboard non-woven bamboo leather some plastic boards PCB boards Operating software: LightBurn (with air assist function M8) LaserGRBL LightBurn Benbox GrblController LiteFire support Windows system support MAC system. Supported file formats NC BMP JPG PNG DXF and other image formats. Data transmission method: USB connection or BT wireless connection Package Size: 62.3x24x22.5cm/24.5x9.4x8.8in Package Weight: 6.85kg/15.1lb Precautions: ●Because of the powerful laser power it is forbidden to run the engraving machine without being supervised. Pause it if you re not around. ●For detailed machine instructions please refer to the manual for parameter settings. ●When operating the laser engraving machine please install the laser protective cover; if it is not installed you need to wear goggles. ●Do not touch the laser with your hands otherwise you may burn your hands. ●Please avoid strong impact on the machine. ●It is forbidden for children under 14 years old to use this product and children over 14 years old need adult supervision. ●Do not apply the laser directly to any specular reflection object which may cause injury to the operator or burn the laser. Packing List: 1 x S30 PRO laser 1 x Laser Repair Kit 1 x 12V automatic air pump 3 x A4 size 3mm wooden board 2 x Limit Switch 1 x 12V 5A power adapter 1 x power cord 1 x USB cable 1 x Air tube 1 x Installation tool Kit 1 x Laser Goggles 1 x A4 metal backing plate Step 1-6 Install the package 1 x Manual 1 x X-axis assembly 2 x X profiles 2 x Y profiles 1 x Control Box Assembly 3 x support feet