Red Carbon Fiber Style Front Bumper Modelling Protective Cover Trim For Toyota Camry 2018 110 X 15 X 10cm

Specifications:Material: ABSColor: Red Carbon FiberFeatures:- Red Carbon Fiber Style- Easy installed and No modification needed ,tape is at the backFitment:For Toyota Camry 2018(The Compatibility Is Just For Reference. Please Compare With Your Original One Before Purchasing! )Installation Methods:1. Clean the location of the installation with rubbing alcohol before proceeding. (Make sure to remove any grease, wax or dust etc.)2. Please ensure that the product completely fits before proceeding with installation. (Note: If there any questions or if the product does not fit properly, please contact us.)3. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature, heat installation location, and plate with a hair dryer or a heat g un on low setting.4. Carefully place the product in desired location and press down for about 1-2 minutes, (Note: Do not wash your car for 24-hour. The adhesive should be cured after 12-hour.)5. The installation is completed.Package Included:1x Bumper Cover TrimNote:1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement. (1inch=2.54cm)3. There Are No Instructions Included In This Kit. Professional Installation Is Highly Recommended!4. The color of the actual items may slightly different from the listing images due to different computer screen,