Raspberry Pi Pico RP2040 Microcontroller Pengganti Nano V3 Promini

NEW
Raspberry Pi Pico Microcontroller pengganti Arduin0o Nanno dan Promini.
*Bisa diprogram dengan ARDUINO IDE dengan bahasa C++
*Support Library Arduino (beberapa library sedang dalam pengembangan)
Spesifikasi (Official Version) :
• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• 26 pin × multi-function GPIO
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC,
• 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• USB 1.1 with device and host support
Tersedia juga Versi Upgrade (non-Official)
*30 pin GPIO Multifunction (include USR Key & LED Built-in)
*Upgrade Flash memory +4MB/+8MB/+16MB (chip Winbond)
*Built-in Reset (RST) button +Auto Reset with Arduino IDE Programming
*Built-in RGB Addressable LED WS2812B (connected to pin 23)
*Built-in USER KEY (USR) button (connected to pin 24)
*Built-in LED onboard (BLINK) connected to pin 25.
Cara memprogram Raspberry Pi Pico dengan Arduino IDE :
1.Gunakan Arduino IDE versi 1.8.13 atau diatasnya
2.Tambahkan json file preference Raspberry Pico RP2040 pada Arduino IDE dengan link berikut :
https://github(doot)com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index(doot)json
3.Add board Raspberry Pico/RP2040 pada board manager Arduino IDE (online)
4.Burn Bootloader Arduino ke dalam Pico RP2040 dengan cara :
a.Sambungkan Pico ke PC/Laptop dengan kabel data
b.Buka Arduino IDE example sketch "Blink"
c.Pada pilihan Board pilih "Raspberry Pi Pico" untuk Official Version dan
"Generic RP2040" untuk Upgrade version (sesuaikan ukuran memory flash nya)
d.Hold tombol BOOT pico, tekan UPLOAD pada IDE,setelah jalan proses "Uploading" tekan reset RST lalu lepas tombol RST dan BOOT, pastikan "Done Uploading"
e.Jika proses Bootloader berhasil selanjutnya cukup upload seperti biasa.