Raspberry Pi Compute Module 3 CM3 Motherboard

Overview The Compute Module 3 is a Raspberry Pi 3 in a more flexible form factor intended for industrial application The Compute Module 3 contains the guts of a Raspberry Pi 3 the BCM2837 processor and 1GB RAM as well as a 4GB eMMC Flash device which is the equivalent of the SD card in the Pi The Pi 3 has a processor speed of 1 2GHz and runs at roughly 10 times the speed of the Pi 1 due to its quad core CPU This is all integrated on to a small 67 6mm x 31mm board which fits into a standard DDR2 SODIMM connector the same type of connector as used for laptop memory The Flash memory is connected directly to the processor on the board but the remaining processor interfaces are available to the user via the connector pins You get the full flexibility of the BCM2837 SoC which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi and designing the Module into a custom system should be relatively straightforward as weve put all the tricky bits onto the Module itself The Compute Module is available for purchase in single units or in batches of hundreds or thousands To get started designing a PCB to use the Module we provide an open source breakout board with a single Module in an affordable CM IO Board Product ID 1336679 Packing Included 1 x Raspberry Pi Compute Module 3 Board