RJ11 Network Line Finder Cable Tracker Tester Toner Electric Wire Tracer w/ Bag

Overview : The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation. For telephone line it can identify some state in the line and more convenience to install debug maintain telephone line. There are a Sender(MS6812-T)and a Receiver(MS6812-R) included in The Cable Tracker. Features: 1 Judge continuity of the cables or wires. 2 Track the cables or wires and diagnose the break point. 3 Receiver the tone signal on the cables or wires(telephone line). 4 Identify the state in the working telephone line(clear ring busy). 5 Send a single solid tone to the object cables or wires. NOTE: The line to be tested must not be in a state to be electric or the signal interference will affect the detection results. Specifications: Send tone frequency: 1.5kHz Receive frequency range: 100 ~ 300 kHz Power supply: 9V batteries (included) Receiver size: 23.8 x 4.3 x 2.6cm Emitter size: 14.5 x 3.5 x 2.5cm Receiver weight: 106g Emitter weight: 114g Package size: 25.5 x 12 x 4cm Package weight: 371g Including a Sender MS6812-T and a Receiver MS6812-R With RJ11 connector cable (about 40cm) on the Sender for plugging into the telephone line jack to be tested With 2 Alligator clips (Cable length: about 70cm) for clip on the cable to be tested directly Package including: 1 x Receiver 1 x Sender 1 x Cloth bag 1 x English user guide