RANMEI 100 Pcs Aluminum Solution Welding Flux-Cored Rods Wire Brazing Rods 1.6MM X 50CM

Features: brand new and high quality Made of high-quality materials durable Wide range of applications-suitable for welding or surfacing of alloys with high strength good forgeability and corrosion resistance. High-quality materials-made of aluminum non-toxic odorless and durable. No solder powder-no need to use other flux powder with aluminum alloy as flux and coating as base. Applications-including welding filler wires and spraying and flame metallization wires. It can also be used for argon arc welding and filling materials of pure aluminum and for connection with aluminum bus bars and guide rods in electrolytic aluminum plants as well as electricity chemicals food etc. Perfect welding effect-the design has sufficient and smooth welding effect because the product has internal powder excellent weldability and corrosion resistance high thermal conductivity high electrical conductivity and excellent processing performance. Product parameters: Material: Aluminum Length 50cm / 1.64ft Diameter: 1.6 mm/0.06 inch usage: Clean and polish the physical surface. Heat the surface of the metal material until the temperature of the metal wire reaches the working temperature of 380°C to 400°C. When repairing thin aluminum the aluminum-based metal is heated to an appropriate working temperature and then the metal wire is rubbed and melted to form a weld. Use propane gas to weld small objects use industrial gas or induction heating device to heat and weld large objects and cool down naturally after welding. note: The thicker the piece the more difficult it is to heat up so it is important to use a reasonable heat source. As long as the surface temperature of the base metal reaches the working temperature of the welding wire welding can be started. When using acetylene welding neutral flame welding should be used but do not directly burn the welding wire. Applicable heat sources: such as propane oxyacetylene etc. Storage: Please store in a dry and ventilated place. The base metal surface must be clean. The temperature of the base metal should reach 400 degrees including the temperature of the base metal during the welding process should be maintained at 400 degrees the temperature can be high or low. Professional use is strongly recommended. The package includes: 100 * Aluminum welding rod Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.