Pneumatic Cylinder Aluminum Alloy High Strength Durable Simple Structrue Pneumatic Swing Clamp Cylinder Double-Acting For Easily Install ACK63‑90R ACK63‑90L

Pneumatic Cylinder Aluminum Alloy High Strength Durable Simple Structrue Pneumatic Swing Clamp Cylinder Double-Acting for Easily Install ACK63‑90R ACK63‑90L Specification: Condition: Item Type: Cylinder Material: Aluminum Alloy Color: As Pictures ShownOptional Type: ACK63-90R ACK63-90L Inner Diameter: Approx. 63mm / 2.5in Piston Rod Outer Diameter: Approx. 20mm / 0.8in Action Type: Double Action Working Medium: Air filtered by a Filter Screen Above 40μm Operating Pressure Range: Approx. 0.15-1.0MPa 22-145psi Guaranteed Pressure Resistance: 1.5MPa 215psi Working Temperature degrees Celsius : -20-80 Operating Speed Range: Approx. 50-200mm/s 2-7.9in/s Travel Tolerance Range: 1.0 Rotation Angle Tolerance Range: Approx. ±1.5° Buffer Type: None Take over Caliber: PT1/8Installation and Use 1. When the cylinder clamps the workpiece it must be performed within the clamping stroke and the clamping operation cannot be performed within the rotation stroke. 2. The clamping plane must be perpendicular to the cylinder . After the workpiece is clamped please do not move the workpiece. 3. Before piping the cylinder the debris in the pipe must be removed to prevent debris from entering the cylinder. 4. The medium used in the cylinder should be filtered by a filter above 40μm before use. 5. When the cylinder is removed and not used for a time pay attention to rust prevention on the add dust blocking to the intake and exhaust ports and apply rust prevention oil to the end of the piston rod. Package List: 1 x Cylinder