Patch Valve Wrench Glue Container Adhesive Repair Kit For Inflatable PVC Boat Kayak Dinghy Pool Floating Air Bed

Specification: Material of Patch: Durable 0.9mm PVC Size of Patch(LxW): 18 x 9.5cm Size of Valve Wrench: 12cm Size of Container: 18.5cm Package Gross Weght: 155G Application: To repair cuts and holes on inflatable boat, raft, kayak, canoe, above ground swimming pool, airwater bedmattress,inflatable sofa and lounge, and water toys. Instructions: 1.Clean the surface of the PVC, better use toluene at 99% purity high-purity alcohol, Wipe up, then wait 10min to let it volatilize 2.Dust and other debris must be completely cleaned. 3.If it`s high air-humidity in rainy day, please dry the PVC it with hair drier (operate in low wattage to prevent high temperature damage) to completely dry it before glueing. 4.Cut the patch which is about 3cm larger than the size of the leak on the repairing area, then apply the glue evenly on both the patch and the repairing area 5.To ensure the quality, better to apply it twice in the same way after the glue of the first operation is dry and again. And wait 3~5min and glue them together before it's too dry. 6.Press it lightly with your hand or other blunt object, and it`s better to use a hair dryer (operate in low wattage) for better glueing. 7.It will be ok after 24h. Note: 1.Do not use near fire or flame. 2.Keep out of reach of children. 3.Be careful when using for corners and seams. 4.The glue has a strong smelling. Some people may be sensitive to it. 5.Manual measuring, please allow 1 ~ 5 mm error,thank you. Package Included: 1 X Yellow Ellipse Patch 1 X Grey Ellipse Patch 1 X White Ellipse Patch 1 X Glue 1 X Valve Wrench 1 X Portable Container