Paintless Dent Repair Puller Kits PDR Kits Body Dent Removal Tools Dent Puller Kit

19Pcs Car Dent Repair Bridge puller Glue Gun Taps PDR Tools Kit Specifications: Voltage:100V-240V AC Power:60W Frequency:50-60HZ Material: Plastic + Stailess Steel Size: Blue Glue Gun:193mm*160mm*33mm Bridge Puller:147mm*72mm Yellow Glue Sticks:258mm*11mm Black Glue Sticks:268mm*11mm Plastic Bottle:143mm*38mm*16mm Plastic Shove:108mm*60mm Features: Application:Car surface pits repair -Simple operation, repair the dent in quickly. -Paintless repairing car dent body, does not damage the original paint. -Different sizes of traction tabs, which has used for the different size of dent. -Suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body,washing machine,etc. How to use: 1. Clean the dent with a clean wet cloth 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes 3. Use a proper drawing gasket. Large dent requires a large drawing gasket. 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue) 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly slightly in Winter 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent 7. Check with a Line board. If dent still exists exists, knock it slightly with a flattening hammer or pen 8. Clean the repaired place with a clean wet cloth. Package included: 1 x Bridge Puller 1 x Blue Glue Gun (different country for different plug standard) 5 x Yellow Glue Sticks 5 x Black Glue Sticks 5 x Dent removal device 1 x Plastic Bottle 1 x Plastic Shove