Ozone Onyx Safe Locker(Digital)

OPERATING INSTRUCTIONS FOR Ozone ONYX Digital Safe with Mechanical Over-ride (17cm X 23cm X 17cm) - Content in the Box : 2 Emergency override keys, 2 Mounting bolts, Scratch resistant carpet and 4 AA batteries. Battery Installation : 1. Safe is received in Open Condition. Open the door and insert batteries in Battery Compartment given backside of Safe door. Close the Compartment. 2. Open the Safe - Using Emergency Override Key Remove the rubber emergency override key cover from front of Safe Insert override key into lock and turn key anticlockwise Turn the master knob clockwise. 3. Pull door open Set User Code Open Safe with emergency override key Open the battery compartment and add the 4 AA batteries. 4. Next, locate the red button on the inside Press and hold the red reset button until you hear a beep and the yellow light comes on Input your chosen 3-8 digit code then press (A) or the (B) button. 5. Once the code is entered properly you will hear a beep Try the code with the door still open to ensure that it was accepted * if the yellow light flashes and the buzzer beeps 3 times the new code is invalid and the code input process will have to be repeated. Opening Door Input your 3-8 digit code by pressing on the number pad Press (A) or (B) button Wait for the green light and a single beep Turn the master knob clockwise to open door. 6. 3 Continuous wrong entries will activate the warning beep for 20 seconds. Use emergency * override key to open and stop beeping.