Oxygen Pressure Regulator Gauge O2 Pressure Reducing Valve for Inhalator, 501 Original

Oxygen Pressure Regulator Gauge O2 Pressure Reducer Reducing Valve Flow Meter for Inhalator G5/8\\'\\'Thread Oxygen InhalerDescription:Purpose: Used in hospitals of various sizes to inhale oxygen when rescuing critical patients. It is to adjust the variable inlet pressure to a stable outlet pressure as much as possible.Working principle: After correctly installing the inhaler on the oxygen valve and opening the cylinder valve, the imported high-pressure gas enters the low-pressure chamber from the high-pressure chamber, and enters the patient\\'s nasal cavity through the flow regulating valve and flow meter. After the rescue is completed, first close the bottle valve and then close the flow regulating valve.The safety valve is a loading and unloading device for maintaining the safe use of the inhaler, and a signal device for failure of the inhaler. When the output pressure is damaged and the pressure rises to more than 1.3-2 times the output pressure, the safety valve will automatically ventSafety function:1. Before using this inhaler, check all parts for damage and wipe it with a dry cloth.2. The oxygen pressure gauge and pressure reducer are absolutely oil-free.3. The distilled water in the humidified bottle should be kept clean and replaced frequently.4. During oxygen inhalation therapy, you should always pay attention to the flow of oxygen, which can be adjusted by the doctorSpecification:Material: valve body zinc alloyInput pressure: 15Mpa; output pressure: 0.2MpaOutput flow: 0~10L/minSize: 320*200*100mm Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.Package Content:1 x Oxygen Pressure Regulator