Oukaning 52cc 2 Cycle Pile Driver T-Post Planter Fence Post Jack Hammer Driver Gas-Power

Specification: Brand new Engine type: two-stroke air cooling single cylinder Displacement: 52cc Fuel type: mixed Oil (25 gasoline: 1 motor oil) Fuel tank capacity: 1 L Max. power & speed: 1900W(2.3HP)/6500r/min Max. torque & speed: 2.5N.m/5500r/min Fuel consumption rate: ≤0.6L/h Impact frequency: 1300-3000BPM Impact energy: 20-55J Carburetor type: MZ15-048 Spark plug type: BM6A Starter System: Hand pull start Size: approx. 74*34*26cm Post driving head mount size: (55、70mm) Package included: 1 x petrol post driver 2 x post driving head 1 x mixing oil bottle 1 x tools kit 1. If the pile driver has the problem of not hammering: 1. Whether too much butter is added at the place where the butter is added clean up the excess oil in the cylinder before disassembling and re-add about 20g of high temperature resistant butter. 2. The speed of the carburetor can be slightly fine-tuned. If the impact frequency is too high it can be lowered if the hand cannot hold it. Otherwise the impact frequency should be increased. Note that it is fine-tuning. 2. The machine is not easy to start. First check the ratio of oil: gasoline: oil = 25:1 be sure to use a good second-flush oil. The starter rope is pulled out an arm s distance and it can be started by pulling it two or three times in a row but it is also related to the temperature and sometimes it needs to be pulled several times. When the cold engine starts close the damper (for good start the warm engine can be opened and start) and open the damper after the machine is normal.今天 10:24