Openlog Blackbox Cleanflight For Naze32 SP Racing F3 CC3D Flight Flash Micro Sd Data Recorder UART
CC3D
sku: 1065615
561.00 руб.
Shipping from: China
Description
Openlog Blackbox Cleanflight For Naze32 SP Racing F3 CC3D Flight Flash MicroSD Data Recorder UARTDescription:VCC input: 3.3V-12V (Recommended 3.3V-5V)Log to low-cost microSD FAT16/32 cards up to 64GBSimple command interfaceConfigurable baud ratesDefaut bootloader is pro mini atmage328P 5V 16MhzFour SPI pogo pinsTwo LEDs indicate writing status2mA idle, 6mA at maximum recording rateFeatures:OpenLog(blackbox) is a data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog(blackbox) can store or log huge amounts of serial data and act as a black box of sorts to store all the serial data that your project generates.The board has contained the openlog_blackbox_v2.0 firmware. Flight conroller transmits your flight data information on every control loop iteration over a serial port to an OpenLog to be recorded. After your flight, you can view the resulting logs using the interactive log viewer:https://github.com/cleanflight/blackbox-log-viewerYou can also use the blackbox_decode tool to turn the logs into CSV files for analysis, or render your flight log as a video using the blackbox_render tool. Those tools can be found in this repository:https://github.com/cleanflight/blackbox-toolsOpenLog configurationPower up the OpenLog with a microSD card inside, wait 10 seconds or so, then power it down and plug the microSD card into your computer. You should find a CONFIG.TXT file on the card, open it up in a text editor. You should see the baud
Price history chart & currency exchange rate