On The Go OTG2-SDI-BF Portable Mixed Bed Water Deionizer with Brass Fittings

On The Go Portable Mixed Bed Water Deionizer with Brass Fittings produces mineral-free water that leaves no water spotting after rinsing a clean RV. Dissolved minerals are the culprit for water spotting after rinsing RVs. Water flowing through the first resin material removes calcium iron and magnesium ions similar to a normal water softening process. However unlike home softening equipment deionization units have a second type of resin that also removes negatively charged ions such as Fluorides in the process. The result is mineral-free water that leaves no water spotting after rinsing a clean RV. Small - only 22 inches tall 6 3/4 diameter and 18 lbs.> TDS meter lets you know when to recharge the deionizer.> Easy and fast hook-up.> No need to dry after washing.> Approx 6 to 15 rinses for a 36 Class A RV.> Provides up to 450 gallons of DI water.> Replacing resin is simple and easy.>Flow Rate: Less than 2 gallons/minute for best performance & effectiveness> 1 year limited .> Made in the USA.> This Deionizer includes brass fittings.> Comes complete with a high-flow shut-off valve 4 ft hose cap and plug for travel plus an easy-to-read handheld TDS meter.> The TDS (Total Dissolved Solids) of the water source will help determine the capacity of clean water your unit will output before resin replacement is necessary. The included TDS meter will indicate when this needs to be done but this chart will give you a general idea when this will need to take place. The TDS can range from zero to 1000 PPM. The frequency for refilling is dependent upon the TDS of the water source flow rate and the gallons used per application. TDS Level (PPM) Capacity (Gallons) 100 450 200 235 250 180 300 160 400 115 On The Go Portable Mixed BedWater Deionizer with Brass Fittings