NeosKon Lift Chair Part Metal Connector on End of Stroke Tube

This is a metal connector that screws onto the end of a NeosKon stroke tube (the tube that moves in and out of the actuator); the connector goes in between two liftrecline brackets and a clevis pin goes through all that to hold it to the frame of the chair. PLEASE NOTE: This will fit a NeosKon actuator; please do not order this part if you have an S or Dewert motor as it will not fit those model actuators. I know some of you are thinking that this idiot doesn t know what he is talking about this part looks just like mine so it should work... You may be right about the idiot part but I am right about what it will fit... This part has reverse or left hand threads so you turn it counter-clockwise to tighten it. The S looks like it but is a different diameter and it has standard or right hand threads. The Dewert connectors are about half the diameter of this one. If the part broke off in the stroke tube as it normally does just be careful when you are getting the piece out that broke off in the tube so as not to damage the threads. Any questions at all please let us know.