NSR122-H ID IC RFID 13.56MHz 125KHz Key Fob NFC Smart Card Reader Writer, Five induction buckle, 501 Original

NSR122-H UID T5577 EM4305 ID IC Cards Tags RFID Copier Duplicator 125KHz Key Fob NFC Smart Card Reader Writer 13.56MHz Encrypted ProgrammerFeature:1) Support IC/ID dual frequency replication2) Driver-free, no need to download software installation3) When connect the RFID Reader to the computer with the USB cable, then can find the software.4) Support ID125K, 8800, 5200, 4305, 5577, 8265 card.5) Support UID FUID CUID UFUID IC semi-encrypted card, IC full encryption card.6) Has USB full speed interface7) Two-color LED light prompt (red light is standby, green is working)8) Built-in buzzer \\\"beep\\\" sound reminderNote: The software does not support for Apple systems, but supports virtual machinesSpecification:Model: NSR122-HPower supply: Use Type-C interface data cableTips: Buzzer, indicator lightWorking voltage: 5V DCWorking current: 200mAStandby current: 50mANormal current: 100mAWorking frequency: 125kHz/13.56 mHzSmart card support: 125kHz ID type: em4100, tk4100, 8800, 5200, em4305, t5577, 8265, etc.For 13.56mhz ic type: uid ic half-encryption care ufuid, full ci-encryption, etc.Supported operating system: The computer supports for windows. for Linux and for mac are not supported.Product size: 108*68*12mmProduct weight: 89gPacking size: 120*80*30mmPackage weight: 135gHow to use the card reader?1) Connect the device to your computer with the USB cable.2) You can find and open the software on your computer.Read and write ordinary 125KHz RFID card1. Place the card on the card reader and press \\\"Read\\\" on the software to scan the card.2. The software will scan and display the card number3. Place a writable T5577 (125kHz writable chip) on the card reader and press \\\"Write\\\" on the software.Read and write 13.56MHz IC, IC half encryption card, IC full encryption card1. Place the card on the card reader and press \\\"Card number\\\" or \\\"Start decoding\\\" on the software.2. The software will scan and display the card number3. Place a writable UID (13.56MHz writable chip) on the card reader and press \\\"Write Card\\\" on the software.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.Package Content:1 X Smart Card Reader1 X Connecting Line