Muxlab HDMI / RS232 Over IP Extender Kit with PoE

The HDMI / RS232 over IP Extender Kit with PoE allows HDMI equipment to be connected up to 330 feet (100m) at 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several encoders and decoders to the same Ethernet network. The Encoder (500753-TX) and Decoder (500753-RX) also support PoE (PD) if used with a PoE Ethernet Switch. The kit comes with one (1) Encoder and one (1) Decoder as well as an IR Emitter and IR Sensor for remote control applications. For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. They recommend using the Cisco SG300 Series Managed Switches. A MuXLab Management Software is available to simplify the configuration and utilization of the 500753. The software can be downloaded from the MuXLab Web Site; http://muxlab.com/hdmi-over-ip-management-software.• HDMI 1.3, PoE powered • Supports up to 1080p resolutions • Supports IR and RS232 transmission • Motion JPEG compression with Very low latency • Transmission up to 330 ft (100m) over Cat5e/6 • Compatible VGA over IP with RS232 • Up to 390 ft (120m) between the TX and RX when no LAN switch is used • Control via Windows-based software or via any web device (mobile, tablet) with use of model 500810 (Pro Digital Network Controller) Applications Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems and medical information systems.