Motorcycle Gear Tensioner With Bearing For 428 Chain

Motorcycle Gear Tensioner With Bearing For 428 Chain Description: Motorcycle chain auto tensioner, steel gear transmission with three bearings, smooth running, Quiet, durable, so that the chain sprocket engagement is always guaranteed to stay in the best state of engagement Specification: Name, mounting hole high, pinch specifications, mainly for cars (reference) RHS 125 42mm 23 ~ 27mm common Cavalier car, small off-road RHS 150 52mm 24 ~ 32mm Prince vehicles, large cross country Tube diameter 28 ~ 29mm fork substantially all round car Fitment: The tensioner is only available in 428 or 428H chain car Material: Stainless steel All primary and secondary bearing waterproof and dustproof Note: 1, when installing a good debugging, ensure front teeth, the chain guide teeth in the same line, excessive deviation may cause tooth displacement or swap chain guide, installed just installed a few days, please remember to pay attention to observe, if done in time moves good adjustment. 2, check each of the screws are tightened to prevent vibration loosening when driving into 3, regular maintenance bearing grease on the sliding parts such as gears, in order to prolong the life of the wear member 4, if you feel bite main bearings and gears partial song, split up the oil, wipe clean, then put glue on the spot bearing reinforcement, you can use 502, a little bit like, next time you may want to replace the bearings to prevent the demolition of a good, It can also prevent gear displacement or loss 5, wear life of gear in about 4W kilometers, this gear is mainly used as the chain drive, the friction coefficient. Bearings wear parts, you can buy a few spare. Package Inluded: 1 X Motorcycle Gear Tensioner