Motorboat Manual Hand Siphon Hose Gas Water Liquid Transfer Pump Pipe Car Fuel Oil Kit

Description: High quality PVC pipe for durable use Corrosion-resistant pure copper interface Portable and lightweight design, space saving You can transfer fuel into your vehicle engine perfectly Transfer fuel,water or other liquids from one container to another easily and quickly Specification: Material: PVC Pipe + Copper interface + Rubber pump Color: Clear+Black Pipe diameter: 8MM Inlet Pipe(not include black pump): 1m Outlet Pipe(not include black pump): 1m Total Length: 211cm /83.07"(appr.) To extract the oil in the fuel tank of the car, the following conditions must be met: 1. There is no anti-pumping filter in the fuel tank 2. When pumping oil, the pipe should be inserted into the fuel tank. Usage: 1. Insert a tube into the liquid you need to extract. First squeeze the rubber ball to remove the air. Then immediately block the tube with the thumb and release the rubber ball. The ball slowly expands and recovers. 2. After the liquid is pumped up to fill the rubber ball, loosen the thumb that blocks the outlet, and repeat the operation 1-2 times to form continuous self-flow. 3. This is the need to use air pressure to achieve self-flow, because the inner diameter of the tube is small, the flow rate is relatively slow, the direction is used from top to bottom, the position of the rubber ball is used as low as possible below the inlet position, the greater the height difference, the better. Package Included: 1 X Motorboat Fuel Hose