Motor Control Inverter SMD Design Variable Frequency Drive With Small Fan For Industrial Use 2.2kw 9A

Motor Control Inverter SMD Design Variable Frequency Drive with Small Fan for Industrial Use 2.2kw 9A Specification: Item Type: Variable Frequency Drive Model: LK320 series Material: ABS Storage Temperature: -25 degrees Celsius ~+55 degrees Celsius Input Voltage: Single phase 200-240V AC Output Voltage: Three phase 0-240V AC Package List: 1 x Variable Frequency Drive 1 x User Manual Note: 1. Before wiring please confirm whether the input power is in a power off state. 2. For wiring work please ask professional electrical engineering personnel. 3. The grounding terminal must be grounded. 4. After the emergency stop circuit wiring is completed be sure to check whether the action is valid. 5. Do not connect the output wire of the inverter with the shell and do not short circuit the output wire. 6. Please confirm whether the voltage of the AC main circuit power supply is consistent with the rated voltage of the inverter. 7. Do not perform withstand voltage test on the inverter. 8. Please connect the braking resistor according to the wiring diagram. 9. Do not connect the power cord to the output U V W terminals. 10. Do not connect the contactor to the output circuit. 11. Be sure to install the protective cover before powering on. When removing the cover be sure to disconnect the power. 12. The inverter that selects the reset and retry function should not be close to the mechanical equipment. Because will restart suddenly when the alarm stops. 13. After confirming that the running signal is cut off the alarm can be reset. If the alarm is reset in the state of running signal the inverter may start suddenly. 14. Do not touch the terminals of the inverter. There is high voltage on the terminals which is very dangerous. 15. During power on do not change wiring and terminal disassembly. 16. Cut off the main circuit power before inspection and maintenance can be carried out. 17. Do not modify the inverter without authorization.