Motion Sensor Stair Light Automatic Stairway Ladder Controller Light Step System

Features: *Controller operation: 1.Long press for 3 seconds to set the number of lights on the stairs click the button until all lights are on up to 32 steps long press again to confirm. 2.The blue light indicates that the serial number light is turned on 3.Touch the button to adjust the speed of turning off the lights on the controller. The higher the four gears the slower the lights will turn on and turn off. *Installation Tips: 1.When the lamp is plugged into the controller be sure to find the socket of the corresponding serial number 2.The controller and sensor can be in the electric box 3.Be sure to connect the positive and negative poles the red is the positive the blue is the negative and the low-voltage current is DC12-24V not AC220V/110V 4.It is recommended to bury the line in advance and install the lights when the stairs are decorated. 5.The wiring needs to be disconnected and the wiring cannot be plugged in to avoid short circuit Specifications: *Product name: 32-channel stair sensor *Voltage: DC12V/DC24V *Power: ≤350w *Channel: 32 *Sensors: 2 Package Contents: 1pcs LED Controller 1pcs screwdriver 2pcs sensor 2pcs extension cord Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.