Miumaeov Wind Turbine Generator Kit 600W 12V with Blade Wind Generator Kit with Charge Controller Wind Power Generator for Marine RV Home Windmill Generator Suit for Hybrid Solar Wind System

This 600W wind turbine generator kit includes a wind turbine anemometer controller 8 blades and other accessories providing you with a powerful tool to help generate electricity through wind which is environmental-friendly. Details 【Anemometer】 The equipped anemometer with MODE&SET buttons a six-blade wind wheel and a thermal probe allows for accurate wind speed measurement. And it s anti-slip rope ensures convenient carrying. 【Built-in Copper Insert】 The copper insert won t damage the nylon fiber material when the bolt is tightened. 【Flange Connection】 The flange connection allows for a stable and firm connection between the wind turbine and the tower tube(excluded) making it safer to use. 【Round Edge】 The round edge of the blades and generator prevents your hands from scratching during installation. How to Install 1. Take out the wind turbine put it on the tower and align it with the flange holes. Install four flat washers on the four bolts and then insert the bolts into the corresponding holes of the flange. Tighten the screws with an Allen key. 2. The three wires of the wind turbine are connected with the transmission cable each pair of wires is not less than 30mm and the adhesive tape at the connection end is 100mm. 3. Connect the wind turbine cable to the controller. The battery must be connected to the controller before wiring. Specifications Color: White Material: Nylon Fiber Die-casting Aluminum Alloy Neodymium Iron Boron Process: Plastic Spraying Die-casting Shape: Fan-shape Round Style: Modern Special Feature: Durable Installation Method: Vertical Type Wind Direction Adjustment: Automatically Adjust the Windward Angle Generator Type: 3-Phase AC Permanent Magnet Generator Braking Method: Electromagnetic Anemometer Battery: One 3V Lithium Battery(Included) Number of Blades: 8 Voltage: 12V Rated Power: 600W Max. Power: 650W Start-up Wind Speed: 3m/s Rated Wind Speed: 13m/s Safe Wind Speed: 50m/s Max. Wind Speed: 60m/s Working Temperature: -40 ~ 80 ℃/-40-176℉ Noise: 40db Blade Length(Each): 40cm/15.7inch Blade Diameter(Wheel Included): 92cm/36.22inch Tower Tube Diameter: 42-45mm/1.65-1.77inch(Not Included) Package Size: 72*28*23cm/30.7*11.02*9.05inch Gross Weight: 8.2kg/18.07lbs Package Included 1* Wind Turbine 8* Blades 1* Wind Wheel 1* Controller 1* Anemometer 1* Flange Plate 1* English Manual Other Accessories for Assembly. Notes 1. This package does not include a tower tube and we recommend using a steel pipe or iron pipe of 1.65-1.77 in diameter. 2. The wind turbine should be installed where there is strong wind or without tall buildings and obstacles. If installing it near the obstacles the position is better as far as possible from obstructions or the installation height should be 20ft higher than the top of obstructions which can make full use of the wind power. It should avoid the cliff and the turbulent region. 3. The power of the wind turbine will increase with the wind speed. When the wind speed is very low the wind wheel of the wind turbine will remain stationary. When the cut-in wind speed is reached (usually 3m/s) the wind wheel starts to rotate and the generator starts to generate electricity. As the wind becomes stronger the output power will increase. When the wind speed reaches the rated wind speed the wind turbine will output its rated power. After that the output power will remain roughly unchanged. When the wind speed increases further and reaches the cut-out wind speed the wind turbine will brake without power output to avoid damage.