Miumaeov Digger 52CC Gasoline Engine Gas Powered Post Hole Fence Digger Auger Single Cylinder 3 Drill 4 /6 /8 Auger Bit

Description Do you want to drill more easily? This gas powered post hole digger made of high-quality aluminum alloy and PP material is very suitable for you. Its engine has been tested for 60 hours of continuous operation which fully guarantees its stable operation. It is ideal for fast drilling into the soil. It allows you to easily set fence posts trees shrubs etc. on the ground. Details 【Cord Starter】 It has an easy-to-start system such as a cord starter which is convenient for your daily use. 【 Comfortable Handle】 This post-hole digger features two anti-skid vibration-proof grips providing maximum leverage and stability while working. 【Translucent Tank】 The convenient built-in translucent fuel tank can help you easily check when you need to refill the fuel. Goggles: This product is equipped with goggles to protect your eyes from flying dust. 【Switch Button】 The machine is equipped with a switch button that allows for easy operation of on/off. 【Straight-through Gearbox】 It has a straight-through gearbox. Unlike the model of a side-mounted engine the straight-through design is more robust and is unlikely to cut the gear. Application The post hole digger is ideal for fast drilling into the soil. It allows easy setting of fence posts trees shrubs etc. on the ground. How to Start 1. Please remember to close the air door and then pull the starter. (don’t forget this step otherwise you will not be able to ignite when you deadlift.) 2. Pull the rope starter 3-5 times the total length of the rope is 70 cm and the safety distance is 30-50 cm. If the safety distance is exceeded the rope will break not the longer the rope is the better. 3. After starting successfully remember to open the damper. Specification Model No: DZ520 Engine Model: 1E44F-5 Material: Aluminum Alloy PP Engine: Single Cylinder 2-stroke Cooling System: Air-cooling Starting System: Cord Starter Clutch Type: Centrifugal Clutch Safety: Bit Lock Whether the Carburetor With Pump: Yes Horsepower: 2.3HP Cylinder Capacity: 52cc Fuel Mix: 25/1 Power:1.7kw/8500rpm Host Size: 51*27*32cm/ 20.08*10.63*12.60in Weight: 11.6 kg/ 35.27lbs (Without Bit) Fuel Tank Capacity: 1.2L/ 0.264Gal Bits Diameter: 10cm/4inch 15cm/6inch 20cm/8inch Drill Length: 80cm/31.49inch Extension Rod Length: 30cm/11.8inch Matchable Drill Diameter: 2.4inch 3inch 4inch 6inch 8inch 10inch Package Included 1* Extension Bar 1* 4 Dia. Auger 1* 6 Dia. Auger 1* 8 Dia. Auger 1* Fuel Mixing Bottle 1* Post Hole Digger 1* English Instruction 1* Tool Kit for Assembly Notes -Please be careful not to pull the starter when the dampers are open. Because when the dampers are open too much air enters and too little oxygen it is hard to start so pull the starter when the dampers are closed. -Please note that if you pull the starter to the end of 70cm it will break the rope its safe distance is 30-50cm pulling the rope hard will cause it to break. If it breaks you will need to buy the starter again. -Please keep the choke in the open position when the machine is in use. -Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.