Miumaeov 1900W Gas Powered T Post Driver 2 Stroke 52cc Gasoline Petrol Fence Post Pile Driver Pile Petrol Machine Single Cylinder Pile Gasoline Engine Push Fence Farm Tool

Description This pile driver is equipped with a high power generator with strong power and the quality is very good. This pile driver is equipped with a powerful 52cc two-stroke gasoline engine. Its max rotational speed reaches up to 6500r/min with a power of 1900W(2.3HP) so it operates very efficiently. So it will be your good helper. Details 【2 Post Driving-head】 The 2 post-driving heads (55-70mm/2.17-2.76in) make this a perfect choice for T-Posts Y-Posts and ground rods. 【Anti-slip Handle】 The non-slip handle has comfortable anti-slip shock absorption effectively reducing fatigue at work. Application This pile driver is suitable for fencing star pickets posts stakes pipe driving gardening agriculture geophysical exploration construction etc. Specification Engine Type: Two-stroke Air Cooling Single-cylinder Displacement: 52cc Fuel Tank Capacity: 1L/0.26gal Fuel Consumption Rate: ≤0.6L/h Impact Frequency: 1300-3000BPM Impact Energy: 20-55J Carburetor Type: MZ15-048 Spark Plug Type: BM6A Starter System: Hand Pull Start Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil) Size: approx. 74*34*26cm/29.13*13.39*10.24in Post Driving Head Mount Size: 55-70mm/2.17-2.76in Max. Power & Speed: 1900W(2.3HP)/6500r/min Max. Torque & Speed: 2.5N.m/5500r/min Package Included 1 x Petrol Post Driver 2 x Post Driving Head 1 x Mixing Oil Bottle 1 x Tools Kit Notes -If the pile driver has the problem of not hammering. Then you need to check whether you have added too much grease clean up the excess oil in the cylinder before disassembly and re-add about 20g of high temperature resistant grease. -If the impact frequency is too high you can reduce the speed of the carburetor slightly if you can t hold it by hand. Otherwise the impact frequency should be increased. -If the machine does not start easily first check the ratio of oil: gasoline: oil = 25:1 be sure to use a good two-stroke oil. Start the rope pull out an arm s length and pull it two or three times in a row to start. When the machine starts cold close the damper and then open the damper after the machine is normal. -Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you don t mind before you order.