Micsig RCP500 Rogowski AC Current Probe 15Hz-300KHz (-3dB ) Bandwidth 200mA(pk)-500A(pk) Multifunction Oscilloscope Prob

Introduction The RCP500 Rogowski AC Current Probe measures AC current up to 500A pk minimum to 200mA pk with bandwidth ranging from 15Hz to 300KHz 1 accuracy and has less than 2mV noise It adopts the Rogowski coil current measurement system within the range the output signal of the system and the current signal to be measured are always linear so the accuracy will not change with the current the coil does not contain magnetic saturation components and no magnetic core and saturation phenomenon no trouble of heating the Rogowski coil does not contain ferromagnetic materials and so has no hysteresis effect the phase difference between the output signal and the current waveform is extremely low which can be less than 0 8° The RCP500 is compactly designed with exquisite appearance suitable for Micsig UPI multi function interface when used with some Micsig new oscilloscope no need extra battery or power supply It can also be used with Micsig PA05 adapter to adapt probe to any other manufacturer s oscilloscope The AC current probes can measure current signals with complex waveforms such as transient inrush currents of power devices sinusoidal currents of three phase power supply systems harmonic components of measured currents current measurement of IGBTs and MOSFETs etc Specification Model NameRCP500Bandwidth15Hz 300KHz 3dB Current Range200mA pk 500A pk Output ConnectorPowered BNC External BNCOutput Sensitivity10mV ATypical Accuracy1 Phase Accuracy≤0 8°