Mgaxyff Remote Controller 2.4Ghz VX2 for DIY Electric Skate Board Speed Wireless Control Wireless Remote Controller Remote Controller

Feature: 1. 2.4G technology strong anti‑interference ability and support three‑speed mode (high‑end: red light; mid‑range: yellow light; low‑end: green light). 2. Remote control and skate board battery indicator and lithium electronic rechargeable battery. 3. Good hand feeling ABS surface spray treatment with anti‑slip wrist strap effective anti‑slip. 4. Streamlined designed more ergonomic easy to control ABS+rubber painted surface heat‑resistant and corrosion‑resistant. 5. Equipped with 2.4GRF receiver it can adapt to most ESCs get rid of the traditional one with one the application range is wider and the signal is strong. 6. There is a constant speed mode don’t worry about long press fatigue uneven speed free your fingers and enjoy more beautiful scenery. 7. Continuous use time can be up to 12 hours automatic shutdown without any operation for more than 10 minutes remote control low battery vibration reminder. Specification: Item Type: Remote Controller Material: ABS + rubber spray paint surface Model: VX2 remote control Color screen Kilometer/hour and mile/hour options FSESC and other VESC (FOCBOX) options Bandwidth: 2.4Ghz Real-time data reading and 0.95OLED display Support 3 speed modes Support fixed speed mode Power indicator for remote control and electric skate board Battery: Li-ion rechargeable battery Non-slip wristband The battery can last for 12 working hours Package List: 1 x Remote Controller 1 x Usb Cable 1 x User Manual 1 x Connection Line 1 x Module Note: 1. Please carefully check the following receiver wiring diagrams corresponding to different FSESCs. Wrong connection of the receiver side cable will cause the receiver to burn. 2. The variants (for VESC4/for VESC6/for non‑VESC) differ only in the receiver cable the remote control is the same. 3. When selecting the UART mode connection for the VX1 remote receiver please program in the VESC tool before connecting. Otherwise it will affect programming and in UART mode no remote adjustment is required.