Metabones Canon EF Lens to Micro Four Thirds Camera Adapter, 0.64x Magnification

A new Micro-4/3 mount Speed Booster adapter designed exclusively for the Panasonic GH4 and other selected Micro Four Thirds cameras, with a magnification of 0.64x. The Speed Booster XL 0.64x uses an advanced 6-element optical design to achieve extraordinary optical performance at apertures up to an incredible f/0.80, a new record for Micro Four Thirds format.The new Speed Booster XL 0.64x reduces the full-frame crop factor of the Panasonic GH4 from 2.0x to 1.28x, thus effectively transforming these cameras into APS-H format. When the GH4 is used in Cinema 4k video mode the horizontal full frame crop factor is reduced from 2.34x to 1.50x, thus effectively transforming the GH4 into a super-35 format 4k cine camera. In addition, the speed of any attached lens is increased by 1 1/3 stops, with a maximum output aperture of f/0.80 when an f/1.2 lens is used. For example, a 50mm f/1.2 becomes a 32mm f/0.80, which is the fastest aperture available for full size Micro Four Thirds format. Optical • Increase maximum aperture by 11/3 stop• Increase MTF• Makes lens 0.64x wider• Patented 6-element/4-group optical design by Caldwell Photographic in the USA• Supports 4k video mode with DX lenses (except on GH5). Electronic • Autofocus• Can be powered either by camera body or by third-party external 5V power source (not included)• Iris/aperture controlled by the camera body• Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lenses• Image stabilization (IS) lens support• Support for cameras with in-body image stabilization (IBIS), including Panasonic GX7, GX8, GX80/85 and Olympus cameras• Electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L)• EXIF (focal length, aperture, zoom range)• Distance and zoom display on camcorders (requires lenses supporting distance information)• Cinema EOS lens support (CN-E 18-80mm T4.4 L), including AF (requires external 5V power through micro USB port), auto iris and servo zoom Other • New positive-lock EF lens mount. • Detachable tripod foot compatible with Arca Swiss, Markins and Photo Clam ball heads.• Rubber gasket protects MTF mount connection from dust and moisture.• The opening is flocked with felt material to reduce internal reflection. Limitations • Supports only Panasonic GH5, GH4, GH3, G3, G5, G6, G7, G10, GF3, GF5, GF6, GX1, GX8, GX80/GX85, Olympus E-PL7, PEN-F, Blackmagic Cinema Camera with Micro Four Thirds mount, Pocket Cinema Camera and Micro Cinema Camera• EF-S lenses require modification to fit or may remain incompatible even after modification (but third party DX lenses can be used without modification)• On GH5, Speed Booster XL can be used with full frame lenses only. DX lenses are unable to cover full-sensor-width readout + in-body image stabilizer (IBIS)• EF-S and third party DX lenses does not cover the full Micro Four Thirds sensor in still photo and FHD video (but will cover 4k video mode on GH4, GX8 and GX80/85).• No video AF for Olympus• AF may not work if the maximum aperture of the lens plus any EF Extender or other teleconverter attached is smaller than f/8 before boost or smaller than f/5.1 after boost.• AFC (continuous AF) and AFF (flexible AF) modes are not supported, except on Olympus OM-D E-M1.• Panasonic video AF may hunt more than a native lens or have unsatisfactory performance.• Some Tamron lenses may have unsatisfactory AF accuracy.• No support for Focus Stacking and Focus Bracketing on Olympus.• On Olympus, other than E-M1, you may move the single AF point among any of the 81, but you may not multi-point AF. There is no restriction on E-M1 and Panasonic.• Very early Olympus models (e.g. E-PL1) have no autofocus support.• EF-mount lenses are not silent but may make audible click noises during autofocus operation and iris changes which may be picked up by the built-in microphone of the camera. An external microphone is recommended for video.• Use of Canon Cinema lenses such as CN-E 18-80mm T4.4 L KAS S for still photography is not supported.• Iris changes are in 1/8 stop steps which may be noticeable in video recordings. Programmed exposure mode and shutter priority exposure mode should not be used for video. This limitation does not apply to Cinema EOS lenses which permit fine resolution iris control, such as CN-E 18-80mm T4.4 L IS KAS S.• No support for in-camera correction such as peripheral shading, CA and distortion Compatibility The Speed Booster XL 0.64x is similar to the Blackmagic-specific 0.64x BMCC Speed Booster (MB_SPEF-BMCC-BM1), but has been completely re-designed to meet the following requirements:• The working distance has increased by 1mm to permit use on the Panasonic GH4 and a number of other Micro Four Thirds cameras without touching the flexible outer cover of the camera's shutter mechanism.• The optics are optimized for a standard Micro Four Thirds filter stack thickness of 4mm rather than the 2.4mm found in Blackmagic cameras.• The image circle diameter has been increased to 21.63mm so that the full 17.3mm x 13mm Four Thirds format is covered. This has been achieved while maintaining unusually high image quality over the 17.4mm image circle used by the Panasonic GH4 in its Cinema 4k video mode. Autofocus with an Optimum Balance of Accuracy, Speed, Consistency and Reliability New in Speed Booster XL for Canon EF Mount to Micro Four Thirds is auto focus support, subject to certain limitations. We are pleased to report that Panasonic Micro Four Thirds camera bodies are capable of auto focusing accurately even if the maximum aperture of the Speed Booster and the lens combined is in the sub-f/1.0 range. Although our first and foremost priority is accuracy, we are able to make great strides in auto focus speed as well. Manual Focus Lens Compatibility • Some improperly-made M42 screw mount adapters may short the electronic contacts of the Speed Booster and cause damage to the Speed Booster and/or camera body.• Focus confirmation "chips" such as Dandelion are incompatible.• Many manual focus lenses (e.g. OM 28/2.8, OM 50/1.8, Leica R 15/3.5) have rear protrusions (spikes, levers, other appendages) which would damage the optics and/or housing of Speed Booster. They need to be modified before they can be safely used on Speed Booster. Check and make sure there are no rear protrusions from the adapter/lens combination before using on Speed Booster. Scratches and damages caused by rear protrusions on Speed Booster are not covered by warranty. Why Metabones? Since its inception, Metabones has been designing and manufacturing lens adapters recognized among professionals and enthusiasts as leaders in design and workmanship.Contrary to the popular trend of other factories using an aluminum ring painted black on the camera-body-side, we instead take no short-cut but use precision-machined brass with chromium plating on both the camera-body and the lens sides of our adapters, in order to ensure smooth mounting, great appearance and durability. The lens side of the adapter features a strong leaf-spring structure, strengthening the adapter-lens connection and ensuring tightness of the lens in order to reduce wear and prevent focus errors and optical alignment issues from appearing.Metabones uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. All Metabones Adapters follow this tradition of uncompromising precision, robust build quality and outstanding finish. Our new Smart Adapter series of products add industry-leading electronic interfacing technology from Canada, with true electronic control of the lens' aperture directly from the camera body.• Both camera-side and lens-side of the adapter are made of brass, precision-machined and plated with chromium.• Satin surface finish - just like your OEM lens and camera mounts.• Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens.• Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements.• True electronic integration of aperture diaphragm - let camera automatically choose aperture in P or S exposure modes, or dial in yourself on the camera body in A or M modes.• EXIF data such as lens identification, focal length and aperture.