Matek Systems F722-STD STM32F722 F7 Flight Controller Built-in OSD BMP280 Barometer Blackbox for RC Drone

Matek Systems F722-STD STM32F722 Flight Controller Built-in BetaFlight OSD BMP280 Barometer Blackbox Specification(User manual): Brand name: Matek Systems Item name: F722-STD flight controller 36x36mm PCB with 30.5mm mounting holes Weight: 7g MCU: 216MHz STM32F722RET6 IMU: 32K ICM20602 gyro/accelerometer (SPI) Baro: BMP280 (I2C) OSD: BetaFlight OSD w/ AT7456E chip Blackbox: MicroSD card slot (SD/SDHC) VCP, UART1, UART2, UART3, UART4, UART5 PPM/UART Shared: UART2-RX Battery Voltage Sensor: 1:10 Current Sensor: No (FCHUB-6S, FCHUB-VTX option) BEC 5V: No (FCHUB-6S, FCHUB-VTX option) LDO 3.3V: Max.300mA I2C1 SDA & SCL: Yes Camera control: Yes DAC: Yes WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes Features: 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 7x PWM / DShot outputs without conflict 5x UARTs 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND 1x I2C1 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible) 1x Side-press button for BOOT(DFU) mode 1x 16pin bottom mounted FFC Slot for FCHUB-6S or FCHUB-VTX connection Package included: 1x F722-STD flight controller 2x 0.5mm*16Pin 5cm Flexible Flat Cable 4x M3 Anti-vibration Standoffs