Matek FCHUB-6S Hub Power Distribution Board 5V & 10V BEC Built-in 184A Current Sensor for RC Drone

Matek FCHUB-6S Hub Power Distribution Board 5V & 10V BEC Built-in 184A Current Sensor Describtion: -This PDB distribution power from from a 3-6S Lipo pack to 4 ESCs, as well as providing regulated & filtered DC 5V & DC 10V outputs for powering Cameras, RC receivers, Flight Controllers, Video Transmitters, LEDs, etc. - It also has buit-in 184A current sensor and offers a FFC socket to connect the Matek flight controller conviently. Specification: Brand Name: Matek Model: FCHUB-6S Item Name: Power Distribution Board Built-in Current Sensor Size: 36x36mm 30.5x30.5mm Hole Mounting M3 Weight: 8.5g BEC Output: 5V & 10V 5V BEC Output: - Designed for RC Receivers, Flight Controllers, OSD and Servos. - DC/DC synchrous buck regulator - Voltage: 5.0V (4.9-5.1)DC - Current: 1.5A (Max. 2.0A 10S/minute) - Short-circuit tolerant ( 2 Seconds/minuate) 10V BEC Output: -Designed for VTX or FPV Camera - Voltage: 10.0V (9.8-10.2) DC - Current: 1.5A ( Max. 2.0A 10S/minute) - Short-circuit tolerant ( 2 Seconds/minuate) - 10V can be used to power cameras labeled as 12V. - The 3S Lipo input voltage should be 11V plus. Current Sensor Module - Max. Range: 184A - 3.3V ADC - Scale the output voltage to milliamps ( 1/10th mW/A): 179 Features: - Total 4 pairs ESC solder tabs are fix for X Type frame - Max. 27V input w/ TVS protection - Built-in current sensor 184A - PDB: 4*30A ( 4*46A, 5 seconds) 4 layers*2oz copper PCB - BEC [email protected] ( Max. 2A) w/ 100uf panasonic POSCAP filter - BEC [email protected] ( Max. 2A) w/ 47uf TDK MLCC filter - 5V&10V output LED indicators & Short circuit tolerant Package Included: 1x FCHUB-6S PDB Board 1x bag of screws