Matek BetaFlight F405-CTR Flight Controller Built-in PDB+Matek 5.8G Video Transmitter VTX-HV for RC Drone

Matek BetaFlight F405-CTR Flight Controller Built-in PDB + Matek 5.8G Video Transmitter VTX-HV Specification: Matek F405-CTR (User manual): Brand name: Matek Systems Item name: BetaFlight F405-CTR Size: 36x46mm PCB with 30.5mm mounting holes Weight: 10g FC: MCU: 168MHz STM32F405 IMU: MPU6000 accelerometer/gyro (SPI) Baro: BMP280 (I2C) OSD: BetaFlight OSD w/ AT7456E chip Blackbox: MicroSD card slot (SD/SDHC) VCP, UART1, UART2, UART3, UART4, UART5 Built in inverter for SBUS input (UART2-RX) PPM/UART Shared: UART2-RX SoftSerial on TX2, S5 or S6 optional Camera control on S6 or DAC optional Smartaudio & Tramp VTX protocol supported WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes PDB: Input: 6~30V (3~6S LiPo) w/TVS protection PDB: 4x30A (Max.4x46A) 6 layers*2oz copper PCB BEC: 5V 2A cont. (Max.3A) LDO 3.3V: Max.300mA for Spektrum RX Current Sensor 184A (Scale 179) Battery Voltage Sensor: 1:10 (Scale 110) Matek 5.8G VTX-HV MMCX Ver.(user manual): Input voltage: 7~27V(2~6S LiPo) 40 standard channels, A/B/E/F/R Band Output Power: 25, 200, 500mW switchable BEC Output: 5V/1A for Camera or FC Traditional button+LED control of frequency and power BFCMS control via FC UART _TX Firmware upgradeable Power Consumption: 3.1W Max. @ 500mW Video Input Impedance: 75 Ohm Audio Subcarrier Frequency: 6.5 MHz RF Connector: U.FL (IPEX) Video Format: NTSC/PAL Weight: 6g (Tx only, w/o SMA cable) Size: 36*22*6.5mm w/30.5mm mounting Package included: 1x Matek Systems BetaFlight F405-CTR 1x Rubycon ZLH 35V/470uF (Low ESR) 6x silicon grommets M4 to M3 1x FR4 PCB Plate 36*36*1mm 1x 5.8G Video transmitter (MMCX) 1x PVC Heat-shrink tube 1x MMCX to SMA Female, RG178 cable 9cm