Manifold Block Splitter Pneumatic Manifold Air Distribution Block Corrosion Non Leakage 30x30mm G1/2 Input G1/4 Output For Pumps SY30-02-3F SY30-02-4F SY30-02-5F

Manifold Block Splitter Pneumatic Manifold Air Distribution Block Corrosion Non Leakage 30x30mm G1/2 Input G1/4 Output for Pumps SY30-02-3F SY30-02-4F SY30-02-5F Specification: Item Type: Pneumatic Manifold Air Distribution Block Material: Aluminum Pressure Resistance: 1.0MPA10kgf/cm² Working Pressure: 0~0.9Mpa0~0.92kfg/cm² Adaptation Temperature: 0~60 degrees Celsius Model Total Lengthapprox. Positions/Holes Length x Widthapprox. Main Air Pipe Branch Branch Center Hole Diameter Mounting Hole Diameter Vertical Mounting Hole Center Spacing Horizontal Mounting Hole Center Spacing SY30-02-3F 106mm / 4.17in 3 Position 5 hole 30 x 30mm / 1.18 x 1.18in G1/2 approx.20mm / 0.79in G1/4 approx. 12mm / 0.47in Approx.32mm / 1.26in Approx.5.2mm / 0.2in Approx.20.5mm / 0.81in Approx.32mm / 1.26in SY30-02-4F 138mm / 5.43in 4 Position 6 hole Approx.64mm / 2.52in SY30-02-5F 170mm / 6.69in 5 Position 7 hole Approx.96mm / 3.78in Package List: 1 x Pneumatic Manifold Air Distribution Block Note: 1. Do not unplug and insert the air pipe frequently during the use of the connector which will affect the service life of the connector and air pipe. 2. The pipe inserted into the joint needs to be inserted to the bottom of the joint to avoid the possibility of air leakage. 3. When pulling out the air pipe first confirm that there is in the tube press the end of the joint to the end and pull out the air pipe.