Maker Connector Kit Co2 Cylinder Refill Adapter & 36 Inch Hose and Gauge

Product Description: brand new high quality Made of high quality material durable Specs: 36 Inch Stainless Steel Braided Hose Dual Valve with Pressure Gauge Hoses have a working pressure of 1500 PSI Gauge 3000 PSI Threads are CGA320 for large CO2 tanks TR21-4 for so da cans . Built-in pressure gauge: The product is equipped with a pressure gauge which can clearly see the gas pressure range and control the pressure within a safe range. Our product has two on/off valves is to control the carbon dioxide in the large cylinder to enter the small cylinder and the other is to release the excess gas after filling. Easy to install remember to use a wrench to tighten the connectors to avoid leaks. Precautions: Please read the instructions before use; the large CO2 tank (donor cylinder) must have sufficient pressure if it is liquid CO2 turn the large tank upside down to inflate; if the small tank still cannot be inflated according to the instructions it is recommended to replace the thin thimble cylinder. Not for use with paintball CO2 canisters. When the stainless steel braided hose expands check that the thimble of the vial is not too thick to inflate. If it is replace the thin thimble bottle and it can be used normally. (or contact us) Connection size: Large CO2 Tank Thread: CGA320 Fit So da Can Thread: TR21-4 Not for use with paintball CO2 canisters. Inflation steps: 1. Put the gasket into the oil filling joint confirm that the on/off valve and release valve are closed and turn the needle switch of the small cylinder to the top. 2. Connect the filling station connector to the large bottle and the small bottle to the so da str eam Co2 adapter. 3. Close the air release valve and open the water inlet valve. 4. Turn the needle switch of the adapter clockwise to the bottom to let the gas enter the small cylinder. 5. After the small cylinder is filled with gas reverse the pin switch to the highest position and close the intake valve. 6. Open the air release valve to discharge the excess gas in the hose. 7. After inflating unscrew the small cylinder. Package Included: 1 * Adapter Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data.