Magnetic LED Wall Light Body Motion Sensor Automatic Induction Night Lamp, Yellow, 501 Original

USB Rechargeable Magnetic LED Wall Light Human Body Motion Sensor Automatic Induction Night LampFeature:1. In a dark environment, if there are people moving within the sensing range, the night light will automatically turn on, eliminating the trouble of turning on the lights in the dark. The elderly wake up at night, night breastfeeding, corridors lighting, going to the toilet at night, and emergency power outages.2. 3-6m sensitive response, 120° sensing range. Built-in dual sensing elements, intelligently identify darkness of the environment, and automatically turn on the light after sensing the human body movement at night, which is convenient and practical.3. Super battery life, low energy consumption.4. No punching, with a magnetic sticker on the back, stick it in any corner.5. The exquisite smile appearance, cute lovely, adds joy and happiness to the home.Specification:Lithium Ion Battery: 300mAhLED: 6x 0.2W-80 CRI 2835 Lamp BeadsCharging Interface: Micro 5PINCharging: 300mA/5V No More Than 5.5VCharging Time: 1.5 HLamp Power Consumption: 1.2WLight Sensor Switch: SupportHuman Body Sensing Range: 3-6m/9.84-19.68ftHuman Body Sensing Angle: 110 DegreesDelayed Turn-Off: 30sColor: WhiteGross Weight: 147gNet Weight: 76gPacking Size: 10.5 X 10.5 X 4.5cm/4.13 X 4.13 X 1.77\"Product Size: 9.5 X 9.5 X 4cm/3.74 X 3.74 X 1.57\"Lighting Color: Warm White, Cold WhiteLighting Mode:1. Work in low-illuminance environment: When the ambient light is less than a certain brightness and low illuminance, it automatically enters the non-photosensitive mode and turns on the standby state. The human body moves within 3 meters of the sensor light, and the sensor light detects the continuous movement of the human body within 2 seconds, it will automatically turn on the lighting mode, and the lighting mode will automatically turn off for about 30 seconds. If the human body continues to move within the range of the sensor lamp, the sensor lamp detects the human body movement signal again within 30 seconds, the sensor lamp will automatically clear the previous timing period, and automatically re-enter the next period with a 30-second delay.2. 2. High-Brightness Environment: When the sensor light is placed in a high-brightness environment, the internal light sensor senses high-intensity light, the sensor light automatically turns off the human body sensing function, and the light is off.3. Charging Mode: When the light is not bright enough, it needs to be charged. Plug in the 5V charger to charge, the red light flashes; the red light is always on when it is fully charged.Warm Tip:1. The sensing area of the product surface cannot be covered by other objects, otherwise the sensing sensitivity will be affected.2. Please use a 5V/1A charger to charge in a ventilated place. 3. Avoid installing near heat sources, such as air conditioning outlets, heating outlets, humidifiers, and other locations with drastic temperature changes, and avoid installing in direct sunlight.4. After using for a period of time, if the brightness decreases, please charge it in time.5. After the battery is exhausted, please recycle the used batteries to avoid environmental pollution.6. This product is with magnetic.Note:1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!2. Please allow 1-3mm measuring deviation due to manual measurement.1 X Night Lamp1 X Micro USB Charging Cable1 X Manual1 X Patch Sticker