Machifit No Power Spindle Assembly Small Lathe Accessories B16 Drill Chuck Trimming Belt Set

Description No power DIY woodworking cutting grinding spindle small lathe accessories fit for table saw bench drill electric drill Specification Cutting abilityUnpowered spindleCutting depth10 mm For saw blade size diameter90 10 mm No load speed10000 RPM Scope of applicationMaking small sawPower typeNo powerFeatures The shipper and the synchronous wheel are equipped with the gasket isolation of 1mm to lock tightly The rotation is smooth and without phase grinding and the accuracy is good No power spindle precision machining by grinding machine precision of 0 005mm that is a high precision spindle with less than one wire DIY bench drill bench mill table saw and so on Through the connecting rod the shaft sleeve link is eliminated and the drill clamp is installed directly so the accuracy is higher The non powered spindle Mohs drill chuck connecting rod is precision machined with a grinding machine with an accuracy of 0 005MM Can be used to make bench drills bench mills table saws etc Installation tips 1 Pay attention to the mounting direction of the bearing and carefully look at the description diagram or video 2 Do not damage the bearing blindly Patience and carefulness are the key points of mechanical work 3 Various methods to activate the brain and complete the assembly 4 The sliding block and the contact surface of the synchronous wheel shall be separated by gasket to prevent phase grinding The gasket is small Dont lose it Packag