Machifit MACH3 Z Axis CNC Tool Setting Touch Plate Engraving Machine Drilling Milling Tool

Description Machifit MACH3 Z Axis CNC Tool Setting Touch Plate Engraving Machine Drilling Milling ToolSpecification Wire Material CopperDiameter 35mmThickness 19 2mmEffective Surface Diameter 25mmCable Length 1 2 MDiameter 0 2 square feet Features 1 Black base organic insulating materials high voltage 1000V or more 2 Material impact resistance fatigue resistance resistance to deformation 3 Metal parts aluminum light metal material soft texture excellent electrical properties 4 Relative brass iron the head is not easy to damage 5 All components of non magnetic materials 6 Increase efficiency it can speed up to measure the distance between the Z axis and engraving items Using Method 1 Connect the wire of this tool check insturment to the tool connector of your control board of the machine then the control boards GND connect to the frame ofyour router the frame of the router and the spindle must have connections 2 Two ways to connect this item If your interface board has the limit switch port or other probe port you can connect it to that port If your interface board does not have that port your driver board has that port you can connect it to the driver boards limit switch port 3 Then in the Mach 3 you need to setup the probe Mach3 Config Ports and Pins Input signals Probe enabled the pin number type the one you use and theAuto Tool Zero in the attachment it is the code you can edit it as your requirements Note 1 Red wire cone