MONIPA 72CC 2-Stroke Gas Powered Post Hole Digger Petrol Earth Digger w/ 3 Drill Bits

Description Drilling Holes in the Traditional Way Is Inefficient and Time-consuming. Do You Want to Drill More Easily? Why Not Try This New Post-hole Digger? with Its Powerful 4.1 Hp You Can Easily Increase Your Work Efficiency. This New Post Hole Digger Made of High-quality Aluminum Alloy and Steel Material Is Very Suitable for You. Details Non-slip Handle: with an Ergonomic Handle You Will Feel Comfortable to Grip. the Surface with a Textured Design Also Strengthens Its Non-slip Nature Making It Easy for You to Use. Two-stroke Engine: It Uses a Two-stroke Engine for Stable Operation and There Are Fewer Parts Making It Very Comfortable for You to Use. Large Fuel Tank: It Features a Large 50.72oz Fuel Tank Saving You Time by Eliminating the Need for Frequent Refueling. Goggles: We Provide a Complimentary Pair of Goggles to Protect Your Eyes from Impurities Generated During Work. Extension Rod: Three Extension Rods of Different Lengths Included in the Package Can Be Used with the Drill Bit to Make You Dig Deeper and It Is Long Enough to Make You save More Effort Without Bending down. Tool Kit: This Kit Not Only Helps You to Store Tools but Is Also Very Easy to Carry. Application The Post-hole Digger Is Ideal for Fast Drilling into the Soil. It Allows Easy Setting of Fence Posts Trees Shrubs Etc. on the Ground. It Is Suitable for Ordinary Dirt Ice (Ice Auger Bit Required) Fine Sand Tree Planting Ice Fishing Digging (Ice Auger Bit Required) Hole Drilling for Wire Work Etc. How to Mix Oil In the Ratio of 25 (Gasoline):1 (Motor Oil) Add Gasoline and Motor Oil Separately and Cover with a Lid. Just Shake Them Well. Specification Color: Black Displacement: 72cc Power: 3kw (4.1hp) Rotational Speed: 8500rpm Turbine Reduction Ratio: 1:34 Fuel Mix: 1:25 Fule Tank Volume: 1200ml/50.72oz Available Drill Diameter: 60-300mm/2.36-11.81in Material: Aluminum Alloy Steel Engine: Single Cylinder 2-Stroke Cooling System: Air-cooling Starting System: Hand-pull Starter Clutch Type: Centrifugal Clutch Product Size: 53*37cm/20.86*14.56in Shaft Diameter: 2cm/0.79in Extension Length: 60cm/23.62inch; 50cm/19.68in; 30cm/11.81in Drill Length: 80cm/31.5inch Drill Diameter: 15cm/6in; 25cm/10in; 30cm/12in Gross Weight: 14kg/30.86lbs Net Weight: 13kg/28.66lbs Package Size: 81*56*41cm/31.89*22.05*16.14inch Package Included 1 X Post Hole Digger 1 X Fuel Mixing Bottle 1 X Goggle 1 X Oil Funnel 1 X Tool Kit 3 X Extension Rods 3 X Drill Bits(6 10 12 ) All Accessories for Assembly Notes Please Read the Operating Manual Completely Before Use. and Pay Particular Attention to the Safety Instructions Included. Please Be Careful Not to Pull the Starter When the Dampers Are Open. Because When the Dampers Are Open It Is Hard to Start. Please Note That If You Pull the Starter to the End of 70cm/27.55in It Will Break the Rope. Its Safe Distance Is 30-50cm/11.81-19.69in Pulling the Rope Hard Will Cause It to Break. If It Breaks You Will Need to Buy the Starter Again. Please Keep the Choke in the Open Position When the Machine Is in Use. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement and Make Sure You Do Not Mind Before Ordering.