MKS Robin Nano with MKS Roboin TFT3.5 Touch Screen Kit 3D Printer 32Bit ARM Control Board Support Marlin2.0

Package Included   1 x MKS Robin Nano 32Bit ARM Control Board  1 x MKS Roboin TFT3 5 Touch Screen  Open Source File Instructions https github com makerbase mks MKS Robin NanoThe latest firmware V2 0 0 for Robin Nano is released click to open Robin Nano error type Err1 The hot bed exceeds the maximum temperature limit please check whether the thermal interface is shorted Err2 The nozzle exceeds the maximum temperature limit please check whether the thermal interface is shorted Err3 The hot bed exceeds the minimum temperature limit please check whether the thermal interface is disconnected Err4 The nozzle exceeds the minimum temperature limit please check whether the thermal interface is disconnected Err5 The heating of the nozzle fails If the nozzle does not reach the set temperature difference within the set time an error will be reported please check the configuration file settings or check whether the power supply is sufficient Err6 The heating of the heating bed fails If the heating bed reaches the set temperature difference within the set time an error will be reported please check the configuration file settings or check whether the power supply is sufficient Err7 Thermal runaway when the temperature reaches the target temperature the current temperature is lower than the target temperature value within the set time and exceeds the set temperature an error will be reported please check whether the thermal sensitivity is normal or whether the PID