MKS HLKWIFI Module 3D Printer Control Board Remote Control For MKS TFT Touch Screen

MKS HLKWIFI Module 3D Printer Control Board Remote Control For MKS TFT Touch Screen Introduce: MKS-HLKWIFI is created by MakerBase(MKS) based on HLK-RM04 module, which is suitable for open-source 3D printer. Also, MKS-HLKWIFI is used for MKS Base (updated version 1.2) MKS Gen, MKS Mini, MKS SBase, etc, those are developed by MakerBase, as well as MKS TFT touch screen. Features: 1. Based on strong and stable HLK-RM04 module. 2. Using on MKS motherboard directly. 3. Work with MKS TFT28 touch screen and all MKS series modules. Notice: Due to undercurrent, MKS HLKWIFI can not work with Ramps1.4. Package includes: 1 x 3D Printer Control Board MKS HLKWIFI Module Please visit here to download firmware: click to open github.com/makerbase-mks Appendix 1 Connection: Connect to Aux-1 on MKS BASE, MKS MINI, MKS SBASE, MKS GEN. MKS BASE only supports V1.2 updated version. Usage on Motherboard: 1. Connect WIFI module to AUX-1. 2. Search for WIFI hotspot and connect. 1). Search hotspot HI-LINK-XXXX, and connect. Password: 12345678; 2). If you can not find the hotspot press on button of module for 10 seconds, then restore factory settings. 3). Attention: Under default, the baud rate of HLKWIFI is 115200, which must be as the same as firmware. 3. Configuration on MKS HLKWIFI 1). After enter HI-LINK-XXXX, connect to IP: //192.168.16.254; 2). Log in: accounts: admin; password: admin. 3). Proceed network configuration and modify the Client you need. 4). Any other help, please refer to HLK-RM04 user manual 1.31.pdf. 4. The use of remote control of the printer Printrun Note: Enter the IP address 192.168.16.254:8080 of the WIFI at Port 5. Use Repetier-Host remote control printer Note: Connecting terminal select TCP / IP 6. Use APP control the printer Appendix 2 Connection: Connect to MKS TFT28 touch screen: mks_config.txt Wifi configuration (MKS TFT28 only supports V1.1 updated version) 1. The Wifi mode selection Change the value behind the colon of "cfg_wifi_mode" into the Wifi network you need ("1" is AP mode, "0" is client mode). 2. The wifi configuration of client mode A. Wifi name: change the Wifi name behind the colon of "cfg_wifi_ap_name" into your wireless network. B. Wifi password: change the Wifi password behind the colon of "cfg_wifi_key_code" into your wireless network's password. C. Dynamic accessing IP: set the value behind the colon of "cfg_ip_dhcp_flag" into you need ("0" indicates static IP, "1" indicates dynamic IP). D. IP: change the IP behind the colon "cfg_ip_address" into you need. E. IP mask: change the IP mask behind the colon of "cfg_ip_mask" into you need. F. Gateway IP: change the gateway behind the colon of "cfg_ip_gate" into you need. 3. Wifi configuration instruction on AP module A. Wifi name : change the WIFI name behind "cfg_wifi_ap_name" into the hotspot name you need . B. WIFI password : change the WIFI password behind "cfg_wifi_key_code" into password of wifi hotspot, and save it .