MIARHB Car Fuel Tank Sucker Silicone Hose Liquid Transfer Manual

Car Fuel Tank Sucker Silicone Hose Liquid Transfer Manual Description: This siphon pumps you quickly and easily transfer fuel water or other liquids from one container to another. The rubber -Squeeze pump generates quick suction to start the siphon. For and easy removal of fluids from car radiators and fuel tank. Two flexible PVC transparent suitable and approved for use with petroleum-base. copper interface petrol resistant avoid . Material: rubber Joint: copper Usage: 1 single-handedly took on both ends of the pipe and another hand continuous pinched black suction bags tell the wind blow out a head a head is the oil and no gas blowing out a head is the oil inlet. (identify the oil ) 2. Put the inlet into the fuel tank and the into the oil bucket and control the distance between the pipe and the height difference between the inlet and ; (the pipe is thin enough to reach most of the car s fuel tank. The pipe is transparent and soft enough to control the .) 3 after step need to be aware that just began to when need a hand to hold the oil squeezing suction bag with one hand such as gas suction inlet pipe full (inlet to a) of oil and gasoline will follow the artesian pipe to tank basic don t need to go straight to knead bags. Warm tips: The oil in the fuel tank of the car needs to be pumped 1. There is no oil extraction filter net in the oil tank 2. The pipe should be inserted into the mailbox when pumping oil 0.8cm diameter 1 meters at one end and 1 meters at one end Included: 1 x Hose Liquid Transfer Manual Silicone Sucker Pump Notice: 1.Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same. 2. Please forgive 0.5cm-3cm measuring deviation due to manual measurement.