MD-1006 Kid Metal Detector Beach Searching Gold Finder Treasure Hunter

HOW TO USE 1)Turn the detector on with the ON/OFF switch. Hold the detector near a metal object. You should hear an audible tone. Adjust the volume to a comfortable level. 2)Now, hold the detector well away (in the air) from any metal objects (this is best done outside). 3)Adjust the Sensitivity Control knob until you can only just barely hear the tone. 4)Now turn the Sensitivity Control knob back until it just barely stops this is NOW the most sensitive detection setting. 5)Now bring the detector back down and glide it back and forth with the search coil about 1.27cm (half / an inch) from the ground. 6)Move the search head slowly around the area, if you move too fast you may miss something. 7)You will probably find lots of bottle caps, metal pull tabs and foil wrap. You should collect these and dispose of them in the relevant recycling bins. Do not be discouraged. Keep searching and you will be sure to find some rewarding objects. 8)CAUTION: DO NOT DIP THE SEARCH COIL IN WATER. THIS IS NOT AN UNDERWATER METAL DETECTOR. YOU WILL DAMAGE THE UNIT. RESPECT THE ENVIRONMENT Respect the environment and be thoughtful. It's generally wise to take an extra bag along for any rubbish you dig up. It is good practice to remove andproperly discard these findings instead of burying them again. Do not leave rubbish for other coin hunters to find. When recovering lost items, alwaysmake the smallest hole possible and return the ground surface to the way it was before you started to dig. Do not use a shovel to dig. Many coin huntersuse a small garden trowel and a flat-blade screwdriver. When searching in sand, you will find it easier to use a scoop or a sieve with small holes. If thecoins you find are really dirty, you should be very careful in cleaning them, especially if they are old and possibly of High Va lue. Don not use harsh chemicalsor abrasives. Try soaking them for a day or two in olives oil, and then rub them gently with an old towel to remove the dirt. Specification: Power: 9V (6F22)(not included) Frequency: 28.7KHz Current: Standby: 8mA Max: 40mA Voltage: 7-9V Sensitivity: US 25 Cent: 40mm Indication Mode: Sound mode Stretch Length: 6.78inches Color:Black Weight: 0.465kg Package Weight: 0.495kg Package Size: 43x49x7cm Package includes: 1 X MD-1006 Kid Metal Detector Details pictures: