MAVLink Wifi Bridge 2.4G Wireless Wifi Telemetry Module with Antenna for Pixhawk APM Flight Controller

MAVLink Wifi Bridge 2 4G Wireless Wifi Telemetry Module with Antenna for Pixhawk APM Flight ControllerInstruction It support Mobile Computer and can replace the 3DR data transmission module and free you from the limitation of USB cable It is suitable for all flight control with TTL interface Specification Wireless Module FCC compliantWifi standard 802 11 b g nFrequency Range 2 4G 2 5G 2400M 2483M Size 18 5 x 26mmSuitable For Pixhawk APM2 5 2 6 Mini APMVersion APM Version Pixhawk VersionAPM Version is compatible with APM Mini APM Flight ControllerPixhawk Version is compatible wiht Pixhawk Flight ControllerTransmit power 802 11 b 20dBm 802 11 g 17dBm 802 11 n 14dBm Receive power 802 11 b 91dBm 11Mbps 802 11 g 75dBm 54Mbps 802 11 n 72dBm MCS7 Connect data SSID ALPHAUAVLINK Code alphauavlink Ground stataion IP 192 168 4 1 Protocol UDP Braud 921600Usage For PIXHAWK 1 If connected to Serial1 Telem1 these parameters should be set on the flight controller if using another telemetry port replace the 1 in the parameter name with the telemetry ports number 2 SERIAL1 PROTOCOL 2 MAVLink2 or 1 MAVLink1 3 SERIAL1 BAUD 921 921600 baud 4 If you have problems connecting it may help to set BRD SER1 RTSCTS 0 to disable flow controlalthough this is not normally necessary Connecting from a Ground Station 5 On your PC open the wifi network connections screen and select the wifi access point normally ALPHAUAVLINK or a