MATEKSYS F405-MiniTE Flight Controller STM32F405RGT6 With OSD Support DJI Air Unit For RC Airplane

The new features of F405 miniTE compared with F722 miniSE EOL F405 has 1MB flash which can run with ArduPilot even with INAV firmware some features will be removed on F722 due to limited flash The advantage of F722 is all UARTs have builtin inversion which is not needed when CRSF protocol is widely used on new receivers Redesigned target MATEKF405TE support 8x bi directional DSHOT Support DJI air unit PnP and a 10V BEC for DJI OSD or analog VTX Compared with F722 miniSE 8motors or 6motor 2servos F405 miniTE support 8motors 3servos in INAV BF multirotor mixer InvenSense GEN3 IMU ICM42605Specifications Brand Name MATEKSYS Item Name F405 MiniTEMCU STM32F405RGT6IMU ICM42605OSD AT7456E DJI OSDBaro Goertek SPL06 001 I2C Blackbox 16M byte Flash memoryUARTs 6 Softserial Tx option 1PWM outputs 8x Dshot 12I2C 1ADC 4 VBAT Current RSSI Airspeed PINIO 2SH1 0 8pin connector Vbat G Curr R3 S1 S2 S3 S4 1SH1 0 6pin connector for DJI FPV Air Unit 1LEDs 3 for FC STATUS Blue Green and 3 3V indicator Red BEC Dual BEC 5V 1 7A10V 1 4AOutput 10V output ON OFF switchableMounting Convertible 20mm to 30 5mm mountingPower Input 6 30V 2 S LiPo BEC 5V 1 7A Max 2ABEC 10V 1 4Afor VTX or DJI Air UnitFor stable 10V output input voltage should11V when input voltage 11V output 90 input voltage Battery Voltage Sensor 1K 20K INAV scale 2100 BF scale 210 No Current Sensor built in supports external current sensor of PDB 4in1Firmware ArduPil