Lynx Technik AG OBD 1910 MM 10Gbit/s Multimode to Bi-Directional Transceiver

The OBD 1910 kit is a simple, easy to use, plug and play solution which can extend a 1Gbit/s or 10Gbit/s electrical Ethernet network up to 30km over a single fiber link. Usually 2 fiber links are needed between locations (TX and RX) but the OBD 1910 uses WDM multiplexing to use a single bidirectional fiber link (singlemode fiber).The kit includes 2 Modules and 2 power supplies, just make the network connections and connect the fiber and you are all set. No complex configurations or set ups needed. The modules will support 1Gbit/s and 10Gbit/s Ethernet networks with a maximum throughput of 20Gbit/s (full duplex).If your current network infrastructure is using multimode fiber in each location, then you are limited on connectivity distance. If you need to extend this multimode network over a long distance to another location, then we have the OBD 1910 MM version of the kit, which will convert the dual multimode RX and TX connections into a single bidirectional link using singlemode fiber.Note: This system used WDM optical multiplexing and should only be used in point to point applications. This solution cannot be integrated into a CWDM multiplexed system.