Lowell Manufacturing LPOR2-1419 14U Pull-Out Rack with 2 Slides, 19" Depth,Black

The rack for built-in use measures 19.06"W x 19.22"D x 26.37"H and provide 14 rack units of panel space (14U front rails, 7U rear rails). The rack shall be made with certified U.S. steel and feature a 14-gauge steel base and 11-gauge steel mounting rails tapped 10-32. The base shall feature two heavy duty rails which shall allow the rack to slide forward while supporting a load up to 125 lbs. The rack shall include three cable lacing bars in the rear and a front security panel which shall mount with screws to deter slide-out access to equipment as needed for security. The rack shall have a black powder epoxy finish. For use in cabinets or custom millwork, the top section of the rack slides forward to access mounted electronics. Construction 14-gauge certified U.S. steel base and 11-gauge corner post rails with smooth black powder epoxy finish. Side panels and upper section of base feature multiple obrounds. Lower section of base has a large central opening. Installation The base can be mounted flush or recessed up to 2" in boxed wall or cabinetry. Front security panel screws into position to deter unauthorized access to mounted equipment. Mounting Rails (corner post) 11-gauge steel corner post rails tapped 10-32 with bi-directional numbered RU increments allow rail installation in either direction. Front rails are 10U; rear rails are 7U. Cable Management Three (3) integral cable lacing bars in rear. Two (2) obrounds in each side panel. Hardware Pilot point screws with captive washers for quick assembly. Load Capacity Two (2) bottom slide rails support total load capacity of 125 lbs.