Lithium Battery Rechargeable Saw Brushless Shell Controller Switch Bottom Plate 5 inch Shield Accessories

Feature Hallless brushless ESC drive originally used for brushless angle grinders the power is definitely much larger than that of electric drills it is estimated that the drive is about 500W the internal drive is 12 ToshibaTPCA8057 power MOS tubes the drive is fully sealed and glued and the aluminum alloy shell Heat dissipation A ISHI high temperature electrolytic capacitors driving workmanship is very good The driver can work between 15 26V 5 6S lithium battery light switch between high and low speed keys and the motor can be switched between high and low at will when the motor is running Low speed brushless motor has tested DJI 6010 brushless motor 1080W inner rotor brushless motor Nidec 600W motor 8312 disc brushless motor 2312 brushless motor vacuum cleaner ultra high speed brushless motor can start and run normally we The low speed and low power inner rotor 7 shaped deceleration and 51mm diameter low speed brushless are not acceptable It is estimated that the power is too small and the small differences between the coils are too incompatible Other models of motors are not tested one by one and you need to measure them yourself Be careful not to overload the brushless driver It is recommended not to use an overloaded motor to avoid burning the driver When DIY is used pay attention to the driver s heat It is strictly forbidden to short circuit the output UVW three phase and the positive and negative poles of the power input must not be wrong Pack