Lian-Li Lancool III Mesh E-ATX Mid-Tower Case with Type-C Port, White

LANCOOL III, the premium mid-tower chassis, offers better thermal performance than LANCOOL II by including 4 pre-installed 140mm PWM fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.• Included 4 x 140mm PWM fan• Fully Mesh Design• Hinged Flip Panels• Unprecedented Modularity• Optimize Cooling Support• 12 Drive Capacity• Cable Management with Ease• Reversible FIOAvailable In- Two ColorsThe LANCOOL III black features a premium hairline brushed aluminum element that looks as good as it feels, while the LANCOOL III white features a minimalist white powder coating. The tempered glass panel allows showing off the internal components.Comes equipped with 4 x 140mm high airflow PWM fans that provide strong out-of-box cooling performance.• Front Intake Fan - 200-1800 RPM / 83.5 CFM /2.3 mm H2O• Rear Exhaust Fan- 200-1800 RPM / 83.5 CFM / 2.3 mm H2OExtreme Airflow CraftmanshipA fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III.Top and 2x Bottom Side PanelsThe two bottom side panels provide sufficient airflow to efficiently cool the GPU when fans are installed above the PSU shroud.Front PanelThe 51% porosity offers an ample direct fresh air intake.Hinged Panels All AroundThe hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives.The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle.The mesh panels located on both sides of the PSU shroud area can be removed for cleaning when the front panel is unattached.Flexible ConfigurationWith ample interior room, the LANCOOL III can offer different cooling and usage scenarios.AIR CoolingWith high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build.AIO CoolingWith ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo.Custom Water CoolingWith the ability to support 3 x 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination.Spacious Cooling SupportThe LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 x 120mm fans or a large 420mm radiator can be mounted in the main chamber.Multi-way Front Fan/Radiator BracketThe multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.Removable Top Fan BracketThe removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram.Modular PSU Shroud Bracket - Fan/ Pump/ SSDThe adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5" SSDs, or a pump/reservoir combos.• Back-and-forth adjustability to accommodate for different 360 radiator orientations• Included mounting points for 3 x 2.5" SSDs• Additional pump/reservoir combos mounting points are providedSide Multi-Purpose Mounting SlotsMounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.Extensive Storage CapacityMultiple storage drive mounting locations are supported for up to 12 x 2.5" SSDs or 4 x 3.5" HDDs and 8 x 2.5" SSDs.Adjustable Drive Cage2 adjustable drive cages (each for 2 x 3.5" HDDs or 2 x 2.5" SSDs) can be individually removed or adjusted.Toolless SSD trayTwo spring-loaded SDD trays located behind the motherboard tray allow for a toolless installation of the drives.Side SSD trayThe side-mounted SSD trays located inside the right PSU shroud panel can support up to 3 x 2.5" SSDs or can be removed to improve airflow.Comprehensive Cable ManagementAs the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.3 Layers Self-Securing Closure StrapsHolds 3 different sets of cables separately.Routing Self-Securing Closure StrapsProvides a clear path for cables such as the CPU 8pin, fan cables, USB cables.Layout for Fan Hubs3 fan controllers/ fan hub mounting locations are provided between the large Self-Securing Closure straps, with an additional one at the removable plate behind the motherboard.Hinged Cover DoorsMagnetic, hinged, and removable cable cover doors hide cable clusters and provide easy access at the same time.Sliding Cable Routing CoverBy slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards.Reversible Front I/OOptimized for PC locate on a desk, the front I/O can be relocated to the bottom of the chassis.Friendly PSU InstallationThe removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear.Anti-Sag Bracket for Perfectly Horizontal GPUA GPU anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.